Each Plug Nut® is made with a tapered knurled projection - the large end of which is greater in diameter than the hole in which the nut will be used. An annular groove separates the top of the projection from the underside of the head of the nut. When the nut is pressed into a mating hole, the wall material of the hole is radially displaced in an outward direction. Displaced hole material flows into the knurls and groove to clinch the nut securely in place. This is accomplished without affecting flatness of component product material.
PlugNuts® are being used in the following industries:
PlugNuts® are used in the assembly of the following products:
PlugNuts are faster and easier to use than a standard nut because they lock in place. This allows the bolt to be tightened with a one-tool, one-sided operation. You don't need a wrench to hold the plug nut for your bolt or screw. It is held in place by its ribbed edge which is pressed into your materi
Browse through the PlugNuts section to become familiar the product's uses, benefits and why it makes for a good option over standard nut and bolt configurations.
Standard sizes may be found at the selection table.
If you have any questions regarding standard sizes or parts made to your specifications, please contact us. If you would like to start using Plug Nuts? for your sheet metal fastening needs request a quote right away.
For more information, contact us at firstname.lastname@example.org or call 440 327-1208 / Fax 330-220-4794